- 1 What are the parts of a cabinet door called?
- 2 What is the piece of wood between two cabinet doors called?
- 3 What is the edge of a cabinet door called?
- 4 What are the grooves in doors called?
- 5 What is a boring on a cabinet door?
- 6 What is a short cabinet called?
- 7 What is a long cabinet called?
- 8 What does DFO stand for in cabinets?
- 9 What are the 4 styles of hinge called?
- 10 What is a mullion cabinet door?
- 11 What is considered a cabinet?
- 12 What are the different cabinet styles?
- 13 What is the difference between a door jamb and a door frame?
- 14 What is a door reveal?
- 15 What is the difference between a door frame and casing?
What are the parts of a cabinet door called?
Anatomy of a Cabinet
- Stile: Vertical piece of cabinet door frame, there is one on the left and right side of the door.
- Rail: the horizontal piece of the cabinet door frame at the top and bottom of the door.
- Framing Edge: the cut of the outside of the cabinet door frame.
- Framing Bead: the decorative inside edge of the door frame.
What is the piece of wood between two cabinet doors called?
Finished material attached to the cabinet toe space is referred to as “Toe Kick” or “Toe Space Cover”. The cabinet door overlaps the cabinet opening 1/ 2 ” on all four sides. A decorative hardwood panel installed across an open area, generally used above desks or sinks.
What is the edge of a cabinet door called?
Center panel:This is the section within the rails and stiles of a cabinet door. It can be either flat or raised. Edge profile:This refers to the details making up the outer edge of the cabinet door. Framing bead:This is the detail of the inside edge of a cabinet door or drawer front.
What are the grooves in doors called?
It is the horizontal part of the frame that sits across the top of the door when it’s closed. It’s like a lintel and is usually made out of wood for inside doors and wood, plastic or metal for outside doors. It typically has two sets of grooves that the legs, or ‘jambs’ of the frame slot into.
What is a boring on a cabinet door?
Boring consists of a 35mm diameter hole, 13.5mm deep with a 2.5mm tab dimension from the edge of the door. Insert holes are 8mm in diameter, 11.9mm deep, located 9.5mm from the center of the 35mm bore to the center of the 8mm insert bore.
What is a short cabinet called?
Today “sideboard” is probably the most widely used of all of the terms for a long, low storage piece. The single feature that most distinguishes a sideboard from another storage piece, like a credenza, is its short legs. It also may have cabinets that reach all the way to the floor.
What is a long cabinet called?
Current Function The term credenza is also used interchangeably with a console as a large storage cabinet used anywhere in the home. You can find these accent pieces used in wide hallways, roomy entryways, living rooms and home offices.
What does DFO stand for in cabinets?
DFO Cabinet Abbreviation
|1||DFO||Deputy Field Officers + 1 variant Exam, Education, Business|
|DFO||Deputy Field Officer Exam, Education, Officer|
What are the 4 styles of hinge called?
This type of hinges for doors works with cabinets and decorative doors. The hinge knuckle shows only when the door is closed. Most types of hinges are installed in four mortise, or shallow cut, configurations: full-mortise, half-mortise, full-surface and half-surface.
What is a mullion cabinet door?
A mullion is a type of cabinet door that features glass panels rather than solid wood. The glass panels have dividing bars similar to those found in window panes. Mullion cabinets are often sold in premade units, but cabinetmakers will also accept custom orders.
What is considered a cabinet?
A cabinet is a case or cupboard with shelves and/or drawers for storing or displaying items. Some cabinets are stand alone while others are built in to a wall or are attached to it like a medicine cabinet.
What are the different cabinet styles?
To make the selection a little easier, we’ve narrowed down the options. As far as we’re concerned, these are the only six cabinet styles you need to know: glass-front, Shaker- style, beadboard, flat-front, plywood, and natural (that is, unfinished) wood.
What is the difference between a door jamb and a door frame?
A jamb is the flat surface that runs vertically up either side of the door frame. This is where the hinges are placed to hang the door, as well as the striker plate on the opposite door jamb which helps you to open, close and lock your door. The door frame is all the elements combined.
What is a door reveal?
The reveal is a timber surround fitted to the fin of the window or door and used for installing the product into timber framing. The reveal becomes the internal frame of your window otherwise known as the ‘window sill’ or door covering the stud.
What is the difference between a door frame and casing?
It may also be variously identified as the top jamb or head jamb. The sill is the horizontal component of the door that’s attached to the floor. Casing is the trim nailed to the jamb and the wall. It’s there to hide the gap between the jamb and the part of the door frame that’s behind the wall.